Release Notes for Mitsubishi UPS <> Modbus MUCM Application: ----------------------------------------------------------- 18Jun10 - Added display of input[1] and input[2] at start of debug loop counter. 25Nov09 - Added ODD parity for Modbus port. Added 9900 UPS to list. Fixed debug string to include three characters of the length. Added PEN-T IP Address support (registers 6996-6999) for Modbus Slave 1. 12Jun09 - Added 32bit analog at r[600] for old 2033A. 11Jun09 - New device type added for old 2033A. 05Dec05 - Added MLWF LonWorks device type matching. 27Oct05 - Added support for MLWF Tophat data moving. 13Dec04 - Updated Modbus Register lists in the Manual. New terminal setup on Port 1 to set the UPS type. New light patterns for the LEDs. New Modbus RTU mode server. New Debug terminal seriver mode for RS-485 port. Ignore Port 2 switches. New Firmware 13Dec2004 or later is required. 11Feb04 - Changed SEC transmit to message at a time. 20Oct03 - Removed the hard code to force p2 9600, EVEN. 03Oct03 - Reduced intercharacter delay for 9800A SEC. 30Jan03 - Added light 3 and 4 on Maint. No Ack and Timeout. Fixed retires on Maint. to 3 before marking Offline. Added debug mode if switch 2 in HALT. Removed wait for ACK on Maint. 21Nov02 - First Release.