|
Effective 01
March 2006 |
|
Standard Price List |
|
Niobrara R & D Corporation |
| Part
# |
Description |
List Price |
| |
| Quantum™ Compatible Products |
|
|
| All
Quantum modules are CAPP Products. |
|
|
|
|
QUCM-OE is Transparent Ready™ |
|
|
| |
Quantum Modules |
|
| The QUCM & the QSPXM can be used in local, remote or
distributed I/O racks. The QRIO and
the QUCM configured as an option module must be in the CPU rack. The QUCM can be used stand-alone with a
QXBP rack. Modules come with
configuration software & manual on CD and one-year free firmware
upgrades. Unless otherwise specified,
modules are not supplied with any cabling. |
| QRIO-002 |
Quantum Remote I/O scanner
with two A-B Remote I/O ports. |
$ |
2,995.00 |
| QUCM-O |
Quantum Universal
Communication Module; 2 RJ45 serial ports, switchable RS-232 or RS-485;
protocol converter, data concentrator, or user-programmed module. Preloaded
with QRPC application. |
$ |
2,336.00 |
| QUCM-OE |
Quantum Universal
Communication Module; 1 10BaseT Ethernet port; 2 RJ45 serial ports,
switchable RS-232 or RS-485; protocol converter, data concentrator, or
user-programmed module. Preloaded with
QRPC application which supports Modbus/TCP and SY/MAX® Ethernet protocols. |
$ |
3,152.00 |
| QSPXM |
Quantum Seriplex™ Master,
9-pin Seriplex port. |
$ |
1,814.00 |
|
|
|
|
| |
Single-slot Racks & Power Supplies |
|
|
| The QXBP
supplies 5 volts, 1 amp maximum to a Quantum-compatible module for
stand-alone use. |
| QXBP-001 |
Single slot rack &
power supply for stand-alone QUCM application. Includes TR121 110 volt wall transformer. |
$ |
525.00 |
| QXBP-002 |
Single slot rack &
power supply for stand-alone QUCM applications. No transformer included; 10
to 24 volts AC or DC, 8 watts maximum. |
$ |
474.00 |
|
|
|
|
| |
Data-level Converters |
|
|
| All NR&D DDC2I data-level converters come with the TR92W 110
volt wall transformer. Any can be
ordered without the transformer by appending a -NT onto the part number. The cost is the cost of the DDC2I less the
cost of the TR92W. The DDC2I-NT will
require 9-24 VDC, 1.6 W maximum. |
| DDC2I |
RS-232 to RS-422/485
data-level converter; optically isolated; RJ45 RS-232 connector; DB9 and
removable screw terminal RS-485 connectors; DIN-rail mount; includes TR92W
110 volt wall transformer and MM0 cable for multidropping RS-485 devices off
of a QUCM RS-232 port. |
$ |
435.00 |
| DDC2I-3 |
DDC2I with MM3 cable for
mulitdropping RS-485 devices off of a Quantum RS-232 DB9 port |
$ |
435.00 |
| DDC2I-5 |
DDC2I with MM5 cable for
mulitdropping RS-485 devices off of a PC COM: port |
$ |
435.00 |
| DDC2I-6 |
DDC2I with MM6 cable for
multidropping RS-485 devices off of a 25-pin Modem port |
$ |
435.00 |
|
|
|
|
| |
Quantum, QUCM & DDC2I Cables |
|
|
|
| BB85 |
Breakout box; RJ45 to
terminal block; terminal block is removable with screw terminals (Powerlogic®
pinout); DIN-rail mount; includes MM0 cable to connect to QUCM |
$ |
109.00 |
| MC1 |
PC COM: port to Quantum
RS-232 cable; DB9 to DB9 |
$ |
55.00 |
| MM0 |
QUCM RS-232 port to DDC2I
cable; RJ45 to RJ45 |
$ |
55.00 |
| MM1 |
QUCM RS-232 port to PC COM:
port cable; RJ45 to DB9S |
$ |
55.00 |
| MM2 |
QUCM RS-232 port to
Modicon® DB9 port cable; RJ45 to DB9P |
$ |
55.00 |
| MM3 |
DDC2I to Quantum RS-232 DB9
port cable; RJ45 to DB9P; Also makes a QUCM port look like a PC COM: port |
$ |
55.00 |
| MM4 |
QUCM RS-232 port to Modem
cable; RJ45 to DB25P |
$ |
55.00 |
| MM5 |
DDC2I to PC COM: port
RS-232 cable; RJ45 to DB9S |
$ |
55.00 |
| MM6 |
DDC2I to Modem RS-232
cable; RJ45 to DB25P |
$ |
55.00 |
| MM7 |
QUCM RS-485 port to SY/MAX
port cable; RJ45 to DB9P |
$ |
55.00 |
| MM8 |
QUCM RS-485 port to SY/MAX
Cable-end RS-485 cable; RJ45 to DB9S; makes QUCM RS-485 port look like a
SY/MAX port |
$ |
55.00 |
| MM9 |
QUCM RS-232 port to Modem
cable; RJ45 to DB25P; uses DCD for carrier detect (consult factory before
ordering) |
$ |
55.00 |
| MM10 |
QUCM to GAS Micro cable,
RJ45 to 10 pin header |
$ |
55.00 |
| MM11 |
DDC2I to PC COM: port cable
with DCD jumpered, RJ45 to DB95 |
$ |
55.00 |
| MM12 |
QUCM RS-232 port to Modem,
RJ45 to DB25P, QUCM RTS & CTS connected to Modem DTR & DCD |
$ |
55.00 |
| MM13 |
QUCM to Magelis RS-232
cable, RJ45 to DB25P |
$ |
55.00 |
| MM16 |
QUCM RS-232 to Caterpillar
CCM, RJ45 to RJ45 |
$ |
55.00 |
| MM17 |
CEV-300 to 984A RS-232
cable |
$ |
55.00 |
| MM18 |
QUCM RJ45 RS232 to Yokogawa
Analyzer 25-pin male |
$ |
55.00 |
| MM19 |
QUCM RJ45 RS232 to Digital
Multimeter 9-pin male |
$ |
55.00 |
| TPH |
QUCM or NOE Ethernet port
to hub or switch cable; RJ45 to RJ45 |
$ |
55.00 |
| TPX |
QUCM Ethernet port to NOE
Ethernet port crossover cable, RJ45 to RJ45 |
$ |
55.00 |
|
|
|
|
| |
Transformers |
|
|
| |
| TR121 |
110 VAC wall transformer
for QXBP Single Slot Racks |
$ |
51.00 |
| TR92W |
110 VAC wall transformer
for DDC2I |
$ |
25.00 |
|
|
|
|
| |
Parts |
|
|
| |
| MA9M |
DB9 adapter for connecting
an SC902 cable to a Quantum PLC |
$ |
32.00 |
| NC5 |
5-position Green screw
terminal connector for DDC2I, side wire entry |
$ |
9.50 |
| NC5-T |
5-position Green screw
terminal connector for BB85, top wire entry |
$ |
9.50 |
| PC2 |
2-position Orange Power Connector for DDC2I |
$ |
5.00 |
| PC2S |
2-position Orange Power Connector w/ mounting block for
QXPB and TR121 |
$ |
7.00 |
|
|
|
|
| |
| Compact™ compatible products |
|
|
| All
Compact modules are CAPP Products. |
|
|
|
|
CNOE & CUCM-OE
Modules are Transparent Ready™ |
|
|
|
Compact Modules |
|
| Niobrara Compact Modules must be used in the local rack. |
|
|
| Requires Compact E984-258 or greater PLC with firmware version
2.07 or greater. Modules come with configuration software & manual on CD
and one-year free firmware upgrades. |
|
| For conformal coatings append -CC to part number and add $210.00
to price. |
|
|
|
|
|
|
| CNOE-211 |
Compact Ethernet Module,
RJ45 10BaseT Ethernet port |
$ |
1,281.00 |
| CNOE-800 |
Compact Ethernet Module,
RJ45 10BaseT Ethernet port, 2 RS-232/RS-485 serial ports |
$ |
2,074.00 |
| CNOE-801 |
Compact Ethernet Module,
RJ45 10BaseT Ethernet port, one RS-485 serial port |
$ |
1,677.00 |
| CNOS-001 |
Compact Serial Option
Module, 2 RS-232/RS-485 serial ports |
$ |
1,066.00 |
| CSPXM |
Compact Seriplex Master, 1
DB9 Seriplex port |
$ |
CALL |
| CUCM-O |
Compact User programmable
module, 2 RS-232/RS-485 serial ports |
$ |
2,336.00 |
| CUCM-OE |
Compact User programmable
module, RJ45 10BaseT Ethernet port, 2 RS-232/RS-485 serial ports |
$ |
3,152.00 |
|
|
|
|
| |
Compact Cables |
|
|
| E984 series Compact PLCs have RJ45 RS-232 ports. The A984 series Compacts have DB9 RS-232
ports. |
| MC1 |
A-series Compact PLC to PC
COM: port RS-232 cable; DB9P to DB9S |
$ |
55.00 |
| MM0 |
E-series Compact PLC to
DDC2I RS-232 cable; RJ45 to RJ45 |
$ |
55.00 |
| MM1 |
E-series Compact PLC to PC
COM: port RS-232 cable; RJ45 to DB9S |
$ |
55.00 |
| MM2 |
E-series Compact PLC to
A-series Compact PLC RS-232 cable; RJ45 to DB9P |
$ |
55.00 |
| MM3 |
DDC2I to A-series Compact
RS-232 cable; RJ45 to DB9P; Also makes A-series Compact look like a PC COM:
port |
$ |
55.00 |
| MM4 |
E-series Compact PLC to
Modem RS-232 cable; RJ45 to DB25P |
$ |
55.00 |
| MM9 |
E-series Compact PLC to
Modem RS-232 cable; RJ45 to DB25P; uses DCD for carrier detect (consult
factory before ordering) |
$ |
55.00 |
| MM13 |
E-series Compact to
Magellis RS-232 cable; RJ45 to DB25P |
$ |
55.00 |
|
|
|
|
| |
CNOE-800, CUCM & CNOS Cables |
|
|
| |
| MDLM |
Modbus® Data Line Monitor
(2 9-pin RS-232 connectors), 4 LEDs indicate TX, RX, CTS, RTS |
$ |
55.00 |
| MM0 |
CNOE-800, CUCM or CNOS
RS-232 to DDC2I cable; RJ45 to RJ45 |
$ |
55.00 |
| MM1 |
CNOE-800, CUCM or CNOS
RS-232 to PC cable; RJ45 to DB9S |
$ |
55.00 |
| MM2 |
CNOE-800, CUCM or CNOS
RS-232 to A-series Compact PLC cable; RJ45 to DB9P |
$ |
55.00 |
| MM4 |
CNOE-800, CUCM or CNOS
RS-232 to Modem cable; RJ45 to DB25P |
$ |
55.00 |
| MM7 |
CNOE-800, CUCM or CNOS
RS-485 to SY/MAX port; RJ45 to DB9P |
$ |
55.00 |
| MM8 |
Cable, CNOE-800, CUCM or
CNOS RS-485 to SY/MAX cable-end; RJ45 to DB9S; makes RS-485 port look like a
SY/MAX port |
$ |
55.00 |
| MM9 |
CNOE-800, CUCM or CNOS
RS-232 to Modem Cable; RJ45 to DB25P; uses DCD for carrier detect (consult
factory before ordering) |
$ |
55.00 |
| MM12 |
CNOE-800, CUCM or CNOS
RS-232 to Modem Cable, RJ45 to DB25P, Module RTS & CTS connected to Modem
DTR & DCD |
$ |
55.00 |
| TPH |
Ethernet cable; RJ45 to
RJ45; straight through for connection to a hub or switch |
$ |
55.00 |
| TPX |
Ethernet crossover cable;
RJ45 to RJ45; crossed for device to device connection or connection to a
cross port |
$ |
55.00 |
|
|
|
|
| |
Data-level Converters |
|
|
| All NR&D DDC2I data-level converters come with the TR92W 110
volt wall transformer. Any can be
ordered without the transformer by appending a -NT onto the part number. The cost is the cost of the DDC2I less the
cost of the TR92W. The DDC2I-NT will
require 9-24 VDC, 1.6 W maximum. |
| DDC2I |
RS-232 to RS-422/485
data-level converter; optically isolated; RJ45 RS-232 connector; DB9 and
removable screw terminal RS-485 connectors; DIN-rail mount; includes TR92W
110 volt wall transformer and MM0 cable for multidropping RS-485 devices off
of a CNOE-800, CNOS or CUCM RS-232 port. |
$ |
435.00 |
| DDC2I-3 |
DDC2I with MM3 cable for
mulitdropping RS-485 devices off of an A-series Compact PLC RS-232 DB9 port |
$ |
435.00 |
| DDC2I-5 |
DDC2I with MM5 cable for
mulitdropping RS-485 devices off of a PC COM: port |
$ |
435.00 |
| DDC2I-6 |
DDC2I with MM6 cable for
multidropping RS-485 devices off of a 25-pin Modem port |
$ |
435.00 |
| DDC2I-11 |
DDC2I with MM11 cable for
multidropping RS-485 devices off of a PC COM port with DCD jumpered |
$ |
435.00 |
| |
Momentum® Compatible Products |
| |
| |
Communication Adapters |
| Modules come with configuration software
& manual on CD and one-year free firmware upgrades. |
| MLWF-001 |
Momentum LonWorks® Communication
Adapter; 78Kbaud Free Topology; 2 removable screw terminal connectors; 20MHz
processor |
$ |
264.00 |
| MLWF-002 |
Momentum LonWorks® Communication
Adapter; 78Kbaud Free Topology; 2 removable screw terminal connectors; 40MHz
processor |
$ |
CALL |
|
|
|
|
|
The following MST parts are all optically isolated. |
|
|
| MSTD-101 |
Momentum Serial
Communication Adapter; Modbus RTU, 9600 baud, RS-485 with RJ45 connector |
$ |
185.00 |
| MSTD-102 |
Momentum Serial
Communication Adapter; Modbus ASCII, 9600 baud, RS-485 with RJ45 |
$ |
185.00 |
| MSTD-103 |
Momentum Serial
Communication Adapter; Modbus RTU, 19.2 K baud, RS-485 with RJ45 connector |
$ |
185.00 |
| MSTD-108 |
Momentum Serial
Communication Adapter; Modbus ASCII, 7-bit, 9600 baud, RS-485 with RJ45 |
$ |
185.00 |
| MSTD-201 |
Momentum Serial
Communication Adapter; Modbus RTU, 9600 baud, RS-485 with 4-wire screw
terminal |
$ |
202.00 |
| MSTD-203 |
Momentum Serial
Communication Adapter; Modbus RTU, 19.2 K baud, RS-485 with 4-wire screw
terminal |
$ |
202.00 |
| MSTD-205 |
Momentum Serial
Communication Adapter; Plogic/PNIM/RNIM, 9600 baud, RS-485 with 4-wire screw
terminal |
$ |
202.00 |
| MSTD-206 |
Momentum Serial
Communication Adapter/KYZ counter; Modbus RTU, 9600 baud, RS-485 with 4-wire
screw terminal; use with 24VDC-16
point Momentum input base (P/N 170 ADI 340 00) |
$ |
202.00 |
| MSTD-207 |
Momentum Serial
Communication Adapter/KYZ counter; Modbus RTU, 19.2 K baud, RS-485 with
4-wire screw terminal; use with
24VDC-16 point Momentum input base (P/N 170 ADI 340 00) |
$ |
202.00 |
| MSTD-301 |
Momentum Serial
Communication Adapter; Modbus RTU, 9600 baud, RS-485 with 2-wire screw
terminal |
$ |
194.00 |
| MSTD-303 |
Momentum Serial
Communication Adapter; Modbus RTU, 19.2 K baud, RS-485 with 2-wire screw
terminal |
$ |
194.00 |
| MSTD-304 |
Momentum Serial
Communication Adapter; Modbus ASCII, 19.2 K baud, RS-485 with 2-wire screw
terminal |
$ |
194.00 |
|
|
|
|
| MSTS-101 |
Momentum Serial
Communication Adapter; Modbus RTU, 9600 baud, RS-232 with RJ45 connector |
$ |
185.00 |
| MSTS-102 |
Momentum Serial
Communication Adapter; Modbus ASCII, 9600 baud, RS-232 with RJ45 connector |
$ |
185.00 |
| MSTS-201 |
Momentum Serial
Communication Adapter; Modbus RTU, 9600 baud, RS-232 with 4-wire screw
terminal |
$ |
202.00 |
|
If you need an MST version
that is not in this list please contact us. |
|
|
| |
|
|
| Modules come with configuration software
& manual on CD and one-year free firmware upgrades. |
|
This MUCM is a CAPP Product. |
|
|
| MUCM-002 |
Momentum universal
communication base; 2 removable screw-terminal connectors , 1 RS-232, 1
RS-485; works with all Momentum communication adapters and processors Preloaded with MRPC application. |
$ |
1,050.00 |
|
|
|
|
| |
Momentum & M1E Cables |
|
|
| |
| SC909 |
PC to Momentum, RS-232 to
RS-485, DB9S to DB9 converter cable |
$ |
238.00 |
| SC910 |
PC to Momentum, RS-232 to
RS-485, DB9S to RJ45 converter cable |
$ |
238.00 |
| DC6 |
M1/M1E PLC to SY/MAX
RS-485/422 cable, DB9 male with jack screws to DB9 male with 1-piece
slide-lock |
$ |
81.00 |
| MM0 |
M1/M1E PLC to DDC2I RS-232
cable, RJ45 to RJ45 |
$ |
55.00 |
| MM1 |
M1/M1E PLC to PC COM: port
RS-232 cable; RJ45 to DB9S |
$ |
55.00 |
| MM3 |
Makes M1/M1E look like PC
COM port, RJ45 to DB9P |
$ |
55.00 |
| MM4 |
M1/M1E PLC to Modem RS-232
cable; RJ45 to DB25P |
$ |
55.00 |
| MM7 |
Momentum JNN 210 32 Option
Adapter to SY/MAX port RS-422 cable; RJ45 to DB9P |
$ |
55.00 |
| MM8 |
Momentum JNN 210 32 Option
Adapter to SY/MAX cable-end RS-485 cable; RJ45 to DB9S; makes Momentum port
look like a SY/MAX port |
$ |
55.00 |
| MM9 |
M1/M1E PLC to Modem RS-232
cable; RJ45 to DB25P; uses DCD for carrier detect (consult factory before
ordering) |
$ |
55.00 |
| MM13 |
Momentum to Magelis RS-232
cable, RJ45 to DB25P |
$ |
55.00 |
| TPH |
M1E to Hub or switch
Ethernet cable; RJ45 to RJ45; CAT 5 |
$ |
55.00 |
| TPX |
M1E to M1E or QUCM or NOE
crossover cable; RJ45 to RJ45; CAT 5 |
$ |
55.00 |
|
|
|
|
| |
MUCM Cables |
|
|
|
|
|
|
| SC912 |
PC to MUCM, RS-232 to
RS-485, DB9S to screw terminal, converter cable |
$ |
238.00 |
| MM15 |
MUCM RS-232 port to DDC2I
RS-232 port cable; screw terminal to RJ45 |
$ |
55.00 |
| MU1 |
MUCM RS-232 port to PC COM:
port cable; screw terminal to DB9S |
$ |
55.00 |
| MU2 |
MUCM RS-232 port to Quantum
or Compact DB9 port cable; screw terminal to DB9P |
$ |
55.00 |
| MU3 |
Cable, makes an MUCM RS-232
port look like a PC COM: port; screw terminal to DB9P |
$ |
55.00 |
| MU4 |
MUCM RS-232 port to Modem
cable; screw terminal to DB25P |
$ |
55.00 |
| MU7 |
MUCM RS-485 port to SY/MAX
port cable; screw terminal to DB9P |
$ |
55.00 |
| MU8 |
MUCM RS-485 port to SY/MAX
cable-end; screw terminal to DB9S; makes MUCM port look like a SY/MAX port |
$ |
55.00 |
| MU9 |
MUCM RS-232 port to QUCM or
Momentum PLC or Compact PLC cable; screw terminal to RJ45 |
$ |
55.00 |
| MU10 |
MUCM RS-485 port to QUCM or
Momentum PLC cable; screw terminal to RJ45 |
$ |
55.00 |
| MU11 |
MUCM RS-485 port to
Momentum PLC cable (screw terminal to DB9P) |
$ |
55.00 |
| MU12 |
MUCM RS-232 port to Modem
cable, screw terminal to DB25P with MUCM RTS & CTS connected to Modem DCD
& DTR |
$ |
55.00 |
| MU13 |
MUCM RS232 to 9 pin PC with
DCD & DTR, Phoenix 5 pin to DB9S (female) |
$ |
55.00 |
| MU14 |
MUCM RS232 to 9 pin Modem
with DCD & DTR, Phoenix 5 pin to DB9P (male) |
$ |
55.00 |
| MU16 |
RS232 to connect MUCM to
25-pin CCM |
$ |
55.00 |
| MU17 |
MUCM RS232 to 25 pin
Mitsubishi UPS, Phoenix 5 pin to DB9P (male) |
$ |
55.00 |
|
|
|
|
| |
Data-level Converters |
|
|
| All NR&D DDC2I data-level converters come with the TR92W 110
volt wall transformer. Any can be
ordered without the transformer by appending a -NT onto the part number. The cost is the cost of the DDC2I less the
cost of the TR92W. The DDC2I-NT will
require 9-24 VDC, 1.6 W maximum. |
| DDC2I |
RS-232 to RS-422/485
data-level converter; optically isolated; RJ45 RS-232 connector; DB9 and
removable screw terminal RS-485 connectors; DIN-rail mount; includes TR92W
110 volt wall transformer and MM0 cable for multidropping RS-485 devices off
of a Momentum PLC RS-232 serial port. |
$ |
435.00 |
| DDC2I-5 |
DDC2I with MM5 cable for
mulitdropping RS-485 devices off of a PC COM: port |
$ |
435.00 |
| DDC2I-6 |
DDC2I with MM6 cable for
multidropping RS-485 devices off of a 25-pin Modem port |
$ |
435.00 |
| DDC2I-15 |
DDC2I with MM15 cable for
multidropping RS-485 devices off of an MUCM RS-232 port. |
$ |
435.00 |
|
|
|
|
| |
Parts |
| |
| METH-001 |
Momentum empty
communications adapter enclosure (for
using MUCM stand-alone) |
$ |
16.00 |
| NC3 |
3-position Green screw
terminal connector for MSTD 2-wire |
$ |
6.00 |
| NC5 |
5-position Green screw
terminal connector for MSTD or MUCM 4-wire |
$ |
9.50 |
| PC2 |
2-position Orange network
connector for MLWF |
$ |
5.00 |
| PC2G |
2-position Green power
connector for MUCM |
$ |
5.00 |
| TR121-ST |
Wall transformer for MUCM
(no connector) |
$ |
51.00 |
| |
SY/MAX® Compatible Products |
| The MEB-RT & EPE5-T are Transparents Ready™.
The MEB-RT is a CAPP product. |
|
|
| |
SY/MAX Modules |
|
|
| All SY/MAX modules work in the register racks. The EPE5, MEB, RM14K, SPE4 and UCM4 can be
used stand-alone with NRK2 rack.
Modules come with configuration software & manual on CD and
one-year free firmware upgrades.
Unless otherwise specified, modules are not supplied with any cabling. |
|
|
|
|
| AIM4-2S |
ASCII input module; 4
RS-232 ports, 1 RS-422 configuration/multiplexed SY/MAX port |
$ |
2,456.00 |
| AIM4-2M |
ASCII input module; 4
RS-485 ports, 1 RS-422 configuration/multiplexed SY/MAX port |
$ |
2,820.00 |
| CAM500 |
Content Addressable Memory,
512,000 register memory bank, rack addressed |
$ |
2,098.00 |
| EPE5-T |
Ethernet port Expender with
4 RS-485 ports, 10BaseT Ethernet port, rack addressable |
$ |
3,363.00 |
| IBSM
PLUS |
Interbus-S Remote Bus
Master Module plus 16-bit rack interface |
$ |
3,625.00 |
| IBSS |
Interbus-S Remote Bus Slave
Module |
$ |
1,756.00 |
| MEB-RT |
Modbus Plus™ to
Ethernet bridge; redundant cable
Modbus Plus port, 10BaseT Ethernet port, 2 RS-485 ports, rack addressable |
$ |
3,890.00 |
| RM14K |
Modem for dial-up or leased
lines, up to 14,400 baud, with 6’ phone cable |
$ |
1,756.00 |
| SPE4-1S |
SY/MAX Port Expander with 4
RS-232 ports, 1 RS-422 port, protocol conversion built-in |
$ |
1,521.00 |
| SPE4-2S |
Rack addressed with 4
RS-232 ports, 1 RS-422 port, protocol conversion built-in |
$ |
1,989.00 |
| SPE4-3D |
SY/MAX Port Expander with 4
RS-485 ports, 1 RS-422 port, protocol conversion built-in; rack
addressable, 16-bit wide backplane
interface |
$ |
1,989.00 |
| SPXM |
Seriplex master, 9-pin
Seriplex port |
$ |
815.00 |
| UCM4-M |
Universal Communication
Module with 4 RS-485 ports, user programmed, rack addressable |
$ |
4,032.00 |
| UCM4-S |
Universal Communication
Module with 4 RS-232 ports, user programmed, rack addressable |
$ |
3,505.00 |
|
|
|
|
|
|
|
|
| |
SY/MAX Power Supplies |
|
|
| |
| NRK2 |
Single Slot Rack and power
supply for stand-alone EPE5, MEB, SPE4, RM14K or UCM applications, includes
TR122 110 VAC wall transformer |
$ |
625.00 |
| NRK2-NT |
Single Slot Rack and power
supply for stand-alone NR&D EPE5, MEB, SPE4, RM14K or UCM applications,
no transformer, requires 10-24 volts AC or DC, 20 watts maximum |
$ |
552.00 |
|
|
|
|
| |
SY/MAX Smart Cables |
|
|
| |
| ID422P |
SY/MAX to Model 50
Converter Cable, DB9 to IDEC |
$ |
225.00 |
| MD422P |
SY/MAX to Micro-1™
Converter Cable, DB9 to IDEC RJ connector |
$ |
225.00 |
| RB36P |
SY/MAX to Parallel Printer,
RS-422 to Parallel, DB9 to Centronics 25, replaces SC36P |
$ |
297.00 |
| SB422 |
25-pin female RS-232 (DCE)
to 25-pin male RS-422 Converter |
$ |
238.00 |
| SC606 |
Modem to SY/MAX Converter
Cable, 25-pin male to 9-pin male, RS-232 to RS-422 |
$ |
238.00 |
| SC806 |
25-pin male RS-232 (DTE,
i.e. Modem) to 9-pin female RS-422 (SY/MAX) Converter Cable |
$ |
238.00 |
| SC902 |
SY/MAX Programming Cable,
from PC COM: port to SY/MAX port, DB9 female to DB9 male, RS-232 to RS-422,
includes TR92 110 VAC wall transformer |
$ |
238.00 |
| SC902K |
SC902 Programming Cable
bundled with SD016 25-pin to 9-pin adapter (SC406 replacement) |
$ |
253.00 |
| SC902-NT |
SC902 Programming Cable
supplied without a transformer, requires 7-15 VDC or power from PLC |
$ |
217.00 |
| SC902-ST |
SC902 Programming Cable
with RS-422 end stripped and tinned |
$ |
238.00 |
| SC908 |
9-pin female RS-232 (DCE,
i.e. PC) to 9-pin female RS-422 (SY/MAX) Converter Cable |
$ |
238.00 |
| SD20A |
RS-422 (SY/MAX) to 20
milliamp Converter Cable |
$ |
68.00 |
| SM285 |
RS-422 (SY/MAX) to RS-485
(two wire) Converter |
$ |
135.00 |
|
|
|
|
| |
SY/MAX Protocol Converters |
|
|
| |
| CAT2-SC |
Protocol converter, one
9-pin RS-232 port, one RS-422 port, DIN-rail mount, RNIM slave to Modbus
master |
$ |
794.00 |
| MUCM-002 |
Momentum base, 1 RS-232
port, 1 RS-485 port, preloaded with MRPC application. |
$ |
1,050.00 |
|
|
|
|
| |
SY/MAX Cables |
|
|
| |
| DC1 |
9-pin SY/MAX Differential
Cable (6 foot CC100 equivalent) |
$ |
81.00 |
| DC1-2 |
9-pin SY/MAX Differential
Cable, 2 foot long (CC102 equivalent) |
$ |
74.00 |
| DC2 |
Differential with
Handshaking |
$ |
81.00 |
| DC6 |
M1/M1E PLC to SY/MAX
RS-485/422 cable, DB9 male with jack screws to DB9 male with 1-piece
slide-lock |
$ |
81.00 |
| DC7 |
9-pin SY/MAX Differential
Cable (6 foot CC106 or CAB107 equivalent) |
$ |
66.00 |
| DC8 |
9-pin female SY/MAX pinout
port with slide lock posts and stripped and tinned at the other end, Connect
CAB107 to an PEN-T or SC902 to a PEN. |
$ |
66.00 |
| DE1 |
9-pin SY/MAX Differential
Extension Cable |
$ |
81.00 |
| SDLM |
SY/MAX Data Line Monitor, 4
bicolor LEDs indicate TX, RX, CTS, RTS |
$ |
55.00 |
| SA9F |
9-pin SY/MAX gender
changer/null modem, two 9-pin female connectors |
$ |
30.00 |
| SA9M |
Sy/Max Gender Changer, male
connector |
$ |
30.00 |
| SS39 |
9-pin SY/MAX compatible
RS-422 A/B switch box, three 9-pin female connectors w/ slide lock posts |
$ |
48.00 |
|
|
|
|
| |
SY/NET® Cables & Parts |
|
|
| |
| NS211 |